Jetfire glider
Full balsa kit glider with a span of 305 mm.
Full balsa glider with detachable wing and tail surfaces. You can assemble the model simply by sliding it into the milled cut-outs and grooves in the fuselage; For greater durability and durability of adjustment, parts of the model can be glued with acetone glue (Kanagom, L-510, UHU-Hart, etc.) or with a thin second glue.Kit contains: hull with load, die-cut and printed wing already formed into the upright, pre-cut tail and cabin.Construction tip: The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.Wingspan [mm]: 305 ; Lenght [mm]: 215 ; Weight [g]: 7 ; RC Control: None ; Building difficuilty: S0 ; Difficuilty of piloting: P0 ... több » |  |
Full balsa glider with detachable wing and tail surfaces. You can assemble the model simply by sliding it into the milled cut-outs and grooves in the fuselage; For greater durability and durability of adjustment, parts of the model can be glued with acetone glue (Kanagom, L-510, UHU-Hart, etc.) or with a thin second glue.
Kit contains: hull with load, die-cut and printed wing already formed into the upright, pre-cut tail and cabin.
Construction tip:The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.
Wingspan [mm]: 305 ; Lenght [mm]: 215 ; Weight [g]: 7 ; RC Control: None ; Building difficuilty: S0 ; Difficuilty of piloting: P0
| Wing span [mm] | 305 |
| Length [mm] | 215 |
| Weight [g] | 7 |
| Controlled functions | none |
| Build difficulty | S0 |
| Operating difficulty | P0 |