HBL599SL (0.09s/60°, 23.0kg.cm)
Super high torque/very high speed 53g HV digital brushless low profile standard servo w. metal gears; wide input voltage range 4.8-8.4V, 2xBB. Ideal for 1/10 and 1/8 RC cars. Torque 16kg.cm, speed 0.14s/60° at 4.8V, torque 18kg.cm, speed 0.11s/60° at 6.0V, torque 23kg.cm, speed 0.09s/60° at 7.4V. Aluminium case w. CNC milled heatsink for perfect heat dissipation. Dimensions 40.5x20.5x23.1mm, weight 53.5g. Programmable with DSP-1 programmer.
Super high torque/very high speed programmable digital low-profile standard brushless servo with metal gears and twin ballraced output shaft; ideal for 1/10 and 1/8 RC cars. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads. Wide input voltage range 4.8-7.4 V (nominal), operational 4.8-8.4 V. Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited ... more »Super high torque/very high speed programmable digital low-profile standard brushless servo with metal gears and twin ballraced output shaft; ideal for 1/10 and 1/8 RC cars. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads.
Wide input voltage range 4.8-7.4 V (nominal), operational 4.8-8.4 V.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Torque at 4.8V [kg∙cm] | 16 |
Torque at 6.0V [kg∙cm] | 18 |
Torque at 7.4V [kg∙cm] | 23 |
Speed at 4.8V [s/60st.] | 0.14 |
Speed at 6.0V [s/60st.] | 0.11 |
Speed at 7.4V [s/60st.] | 0.09 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.0008 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 4.8 - 8.4 |
Length [mm] | 40.5 |
Width [mm] | 20.5 |
Height [mm] | 23.1 |
Weight [g] | 53.5 |
Intended for | Aeroplanes,On-road cars,Off-road cars |
Servo motor type | Brushless |
Instruction Manual | 17.1.2024 |