HV1250 (0.054s/60°, 11.0kg.cm)
High torque/super high speed waterproof 57g HV digital standard servo w. metal gears; input voltage 6.0-8.4V (2S LiPo/LiFe), 2xBB. Ideal for RC buggies 1/10 and 1/8, 600-700 class helicopter cyclic. Torque 7.8kg.cm, speed 0.075s/60° at 6.0V, torque 9.6kg.cm, speed 0.066s/60° at 6.8V, torque 10.4kg.cm,speed 0.061s/60° at 7.4V, torque 11.0kg.cm, speed 0.054s/60° at 8.2V. Aluminium mid case for perfect heat dissipation. Dimensions 40x20x37mm, weight 57.67g. Programmable with DSP-1 programmer.
High torque/super high speed dustproof/waterproof digital standard servo with metal gears and twin ballraced output shaft for RC buggies, trucks, rock crawlers 1/10 and 1/8, boats, 600-700 class helicopter cyclic, large model aeroplanes. An aluminium mid case for perfect cooling even under high loads. Input voltage range 6.0-7.4 V (nominal), ideal for 2S LiPo or LiFe receiver battery use. Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse L ... több »High torque/super high speed dustproof/waterproof digital standard servo with metal gears and twin ballraced output shaft for RC buggies, trucks, rock crawlers 1/10 and 1/8, boats, 600-700 class helicopter cyclic, large model aeroplanes. An aluminium mid case for perfect cooling even under high loads.
Input voltage range 6.0-7.4 V (nominal), ideal for 2S LiPo or LiFe receiver battery use.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 7.8 |
Torque at 6.8 V [kg∙cm] | 9.6 |
Torque at 7.4V [kg∙cm] | 10.4 |
Torque at 8.2 V [kg∙cm] | 11 |
Speed at 6.0V [s/60st.] | 0.075 |
Speed at 6.8 V [s/60st.] | 0.066 |
Speed at 7.4V [s/60st.] | 0.061 |
Speed at 8.2 V [s/60st.] | 0.054 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.0008 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 6 - 8.4 |
Length [mm] | 40 |
Width [mm] | 20 |
Height [mm] | 37 |
Weight [g] | 57.67 |
Intended for | Aeroplanes,Helicopters,On-road cars,Off-road cars,Sailing boats,Boats |
Water resistance | Waterproof |
Servo motor type | HV Coreless |
Instruction Manual | 17.1.2024 |