HBL388 (0.14s/60°, 68.0kg.cm)
Ultra high torque 93g HV digital standard brushless servo w. metal gears; input voltage 6.0-8.4V, 2xBB. Ideal for giant model aeroplanes. Torque 50.0kg.cm, speed 0.19s/60° at 6.0V, torque 60.0kg.cm, speed 0.16s/60° at 7.4V, torque 68.0kg.cm, speed 0.14s/60° at 8.2V. Aluminium case w. CNC milled heatsink for perfect heat dissipation. Dimensions 43x22x39.65mm, weight 93.3g. Programmable with DSP-1 programmer.
Ultra high torque programmable digital standard brushless servo with titanium gears and twin ballraced output shaft; ideal for giant model aeroplanes. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads. Input voltage range 6.0-7.4 V (nominal), operational 6.0-8.4 V. Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited within this command value. ... more »
|  |  |  |
 |
Ultra high torque programmable digital standard brushless servo with titanium gears and twin ballraced output shaft; ideal for giant model aeroplanes. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads.
Input voltage range 6.0-7.4 V (nominal), operational 6.0-8.4 V.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
| Servo dimensions | Standard |
| Servo type | Digital |
| Programmable | Yes |
| Torque at 6.0V [kg∙cm] | 50 |
| Torque at 7.4V [kg∙cm] | 60 |
| Torque at 8.2 V [kg∙cm] | 68 |
| Speed at 6.0V [s/60st.] | 0.19 |
| Speed at 7.4V [s/60st.] | 0.16 |
| Speed at 8.2 V [s/60st.] | 0.14 |
| Control pulse width in neutral [µs] | 1520 |
| Frame Rate [Hz] | 333 |
| Deadband [ms] | 0.0008 |
| Servo gears | Metal |
| Ball bearings | 2× |
| High-voltage | Yes |
| Power supply [V] | 6 - 8.4 |
| Length [mm] | 43 |
| Width [mm] | 22 |
| Height [mm] | 39.65 |
| Weight [g] | 93.3 |
| Intended for | Aeroplanes |
| Servo motor type | Brushless |
| Instruction Manual | 17.1.2024 |