HBL550 (0.085s/60°, 38.0kg.cm)
Super high torque/very high speed 79g HV digital brushless standard servo w. metal gears; input voltage 6.0-8.4V, 2xBB. Ideal for RC buggies 1/10, 1/8 and 1/5. Torque 29kg.cm, speed 0.117s/60° at 6.0V, torque 36kg.cm,speed 0.094s/60° at 7.4V, torque 38kg.cm, speed 0.085s/60° at 8.2V. Aluminium case w. CNC milled heatsink for perfect heat dissipation. Dimensions 40x20x38.8mm, weight 79.5g. Programmable with DSP-1 programmer.
Super high torque/very high speed programmable digital standard brushless servo with metal gears and twin ballraced output shaft; ideal for 1/10, 1/8 and 1/5 RC buggies. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads. Input voltage range 6.0-7.4 V (nominal), operational 6.0-8.4 V. Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited within this c ... more »Super high torque/very high speed programmable digital standard brushless servo with metal gears and twin ballraced output shaft; ideal for 1/10, 1/8 and 1/5 RC buggies. An aluminium case with CNC milled heatsink for perfect cooling even under extreme loads.
Input voltage range 6.0-7.4 V (nominal), operational 6.0-8.4 V.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 29 |
Torque at 7.4V [kg∙cm] | 36 |
Torque at 8.2 V [kg∙cm] | 38 |
Speed at 6.0V [s/60st.] | 0.117 |
Speed at 7.4V [s/60st.] | 0.094 |
Speed at 8.2 V [s/60st.] | 0.085 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 6 - 8.4 |
Length [mm] | 40 |
Width [mm] | 20 |
Height [mm] | 38.8 |
Weight [g] | 79.5 |
Intended for | Aeroplanes,On-road cars,Off-road cars |
Servo motor type | Brushless |
Instruction Manual | 17.1.2024 |