DS1220 (0.14s/60°, 30.4kg.cm)
Very high torque waterproof 57g digital standard servo w. metal gears; input voltage 6.0-6.8V (2S LiFe), 2xBB. Ideal for RC buggies, trucks, rock crawlers 1/10 and 1/8, 600-700 class helicopter cyclic, large model aeroplanes. Torque 24.9kg.cm, speed 0.159s/60° at 6.0V, torque 30,4kg.cm, speed 0.140s/60° at 6.8V. Aluminium mid case for perfect heat dissipation. Dimensions 40x20x37mm, weight 57.44g. Programmable with DSP-1 programmer.
Very high torque dustproof/waterproof digital standard servo with metal gears and twin ballraced output shaft for RC buggies, trucks, rock crawlers 1/10 and 1/8, boats, 600-700 class helicopter cyclic, large model aeroplanes. An aluminium mid case for perfect cooling even under high loads. Input voltage range 4.8-6.6 V (nominal), ideal for 2S LiFe receiver battery or 6.0 V SBEC use. Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: ... több »Very high torque dustproof/waterproof digital standard servo with metal gears and twin ballraced output shaft for RC buggies, trucks, rock crawlers 1/10 and 1/8, boats, 600-700 class helicopter cyclic, large model aeroplanes. An aluminium mid case for perfect cooling even under high loads.
Input voltage range 4.8-6.6 V (nominal), ideal for 2S LiFe receiver battery or 6.0 V SBEC use.
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 26.3 |
Torque at 6.8 V [kg∙cm] | 30.4 |
Speed at 6.0V [s/60st.] | 0.149 |
Speed at 6.8 V [s/60st.] | 0.14 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.0008 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 3.8 - 6.8 |
Length [mm] | 40 |
Width [mm] | 20 |
Height [mm] | 37 |
Weight [g] | 57.44 |
Intended for | Aeroplanes,Helicopters,On-road cars,Off-road cars,Sailing boats,Boats |
Water resistance | Waterproof |
Servo motor type | Coreless |
Instruction Manual | 17.1.2024 |