HV6130 (0.10s/60°, 8.1kg.cm)
Ultra high torque/ high speed 22.5g HV digital slim micro servo w. metal gears; input voltage 6.0–8.4V, 3xBB+2. Ideal for wings of gliders and aerobatic/scale model aeroplanes. Torque 6.0kg.cm, speed 0.140s/60° at 6.0V, torque7.6kg.cm, speed 0.11s/60° at 7.4V, torque 8.1kg.cm, speed 0.10s/60° at 8.2V. Dimensions 30x10x29.8mm, weight 22.5g. Aluminium case for perfect heat dissipation with flat mounting lugs. Programmable with DSP-1 programmer.
Ultra high torque/high speed programmable digital micro servo with titanium gears with 3 ball bearings and two jewel bearings. The high precision no-backlash pre-loaded gears and slim 10 mm servo case makes it particularly suitable for controlling ailerons and flaps in gliders (F3B, F3F, F3J, F5J, etc.) and motor models with thin wing/tailplane profiles. An aluminium case with flat mounting lugs for perfect cooling even under high loads. Input voltage range 6.0–7.4 V (nominal). Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: ... több »Ultra high torque/high speed programmable digital micro servo with titanium gears with 3 ball bearings and two jewel bearings. The high precision no-backlash pre-loaded gears and slim 10 mm servo case makes it particularly suitable for controlling ailerons and flaps in gliders (F3B, F3F, F3J, F5J, etc.) and motor models with thin wing/tailplane profiles. An aluminium case with flat mounting lugs for perfect cooling even under high loads.
Input voltage range 6.0–7.4 V (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Micro |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 6 |
Torque at 7.4V [kg∙cm] | 7.6 |
Torque at 8.2 V [kg∙cm] | 8.1 |
Speed at 6.0V [s/60st.] | 0.14 |
Speed at 7.4V [s/60st.] | 0.11 |
Speed at 8.2 V [s/60st.] | 0.1 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | 3× |
High-voltage | Yes |
Power supply [V] | 6 - 8.4 |
Length [mm] | 30 |
Width [mm] | 10 |
Height [mm] | 29.8 |
Weight [g] | 22.5 |
Intended for | Aeroplanes |
Servo motor type | HV Coreless |
Instruction Manual | 17.1.2024 |