HV6110 (0.10s/60°, 3.4kg.cm)
Very high torque/ high speed 10g HV digital slim micro servo w. metal gears; input voltage 6.0-8.4V, 1xoil-retaining bearing. Ideal wing servo for hand launch gliders, gliders and smaller aerobatic/scale model aeroplanes. Torque 2.6kg.cm, speed 0,14s/60° at 6.0V, torque 3.0kg.cm, speed 0.11s/60° at 7.4V, torque 3.4kg.cm, speed 0.10s/60° at 8.2V. Dimensions 22.5x10x23.8mm, weight 10g. Plastic case with flat mounting lugs. Programmable with DSP-1 programmer.
Very high torque/ high speed programmable digital micro servo with metal gears with 2 jewel bearings and one oil-retaining bearing. The slim 10 mm servo case with flat mounting lugs makes it particularly suitable for controlling ailerons and flaps in hand launch gliders, smaller gliders/hotliners and motor models. Input voltage range 6.0-7.4 V (nominal). Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular r ... more »Very high torque/ high speed programmable digital micro servo with metal gears with 2 jewel bearings and one oil-retaining bearing. The slim 10 mm servo case with flat mounting lugs makes it particularly suitable for controlling ailerons and flaps in hand launch gliders, smaller gliders/hotliners and motor models.
Input voltage range 6.0-7.4 V (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Micro |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 2.6 |
Torque at 7.4V [kg∙cm] | 3 |
Torque at 8.2 V [kg∙cm] | 3.4 |
Speed at 6.0V [s/60st.] | 0.14 |
Speed at 7.4V [s/60st.] | 0.11 |
Speed at 8.2 V [s/60st.] | 0.1 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | None |
High-voltage | Yes |
Power supply [V] | 6 - 8.4 |
Length [mm] | 22.5 |
Width [mm] | 10 |
Height [mm] | 23.8 |
Weight [g] | 10 |
Intended for | Aeroplanes,Helicopters |
Servo motor type | HV Coreless |
Instruction Manual | 17.1.2024 |