DS6100 (0.12s/60°, 3.19kg.cm)
Very high torque/ high speed 9.5g digital slim micro servo w. metal gears; input voltage 4.8-5.0V, 1xoil-retaining bearing. Ideal for hand launch gliders, gliders and smaller aerobatic/scale model aeroplanes. Torque 3.19kg.cm, speed 0.12s/60° at 4.8V, torque 3.32kg.cm, speed 0.11s/60° at 5.0V. Dimensions 22.5x10x23.8mm, weight 9.5g. Plasic case with normal lugs. Programmable with DSP-1 programmer.
Very high torque/ high speed programmable digital micro servo with metal gears with 2 jewel bearings and one oil-retaining bearing. The slim 10 mm servo case makes it particularly suitable for controlling ailerons and flaps in hand launch gliders, smaller gliders/hotliners and motor models. Input voltage range 4.8-5.0 V (nominal). Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited w ... more »Very high torque/ high speed programmable digital micro servo with metal gears with 2 jewel bearings and one oil-retaining bearing. The slim 10 mm servo case makes it particularly suitable for controlling ailerons and flaps in hand launch gliders, smaller gliders/hotliners and motor models.
Input voltage range 4.8-5.0 V (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Micro |
Servo type | Digital |
Programmable | Yes |
Torque at 4.8V [kg∙cm] | 3.19 |
Torque at 5.0 V [kg∙cm] | 3.32 |
Speed at 4.8V [s/60st.] | 0.12 |
Speed at 5.0 V [s/60st.] | 0.11 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | None |
High-voltage | No |
Power supply [V] | 4.8 - 5 |
Length [mm] | 22.5 |
Width [mm] | 10 |
Height [mm] | 23.8 |
Weight [g] | 9.5 |
Intended for | Aeroplanes |
Servo motor type | Coreless |
Instruction Manual | 17.1.2024 |