HV9767 (0.07s/60°, 9.4kg.cm)
Super high torque/super high speed 38.5g HV digital mini servo w. metal gears; input voltage 6.0-8.4V, 2xBB. Ideal for cyclic of 500-600 class helicopters. Torque 6.8kg.cm, speed 0.090s/60° at 6.0V, torque 8.5kg.cm, speed 0.078s/60° at 7.4V, torque 9.4kg.cm, speed 0.070s/60° at 8.2V. Aluminium case for perfect heat dissipation. Dimensions 35.5x15x28.55mm, weight 38.55g. Programmable w. DSP-1 programmer.
Super high torque/super high speed programmable digital mini servo with metal gears with twin ballraced output shaft. Ideal for cyclic of 500-600 class helicopters. An aluminium case with for perfect cooling even under high loads. Input voltage range 6.0-7.4 V (nominal). Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited within this command value.Neutral: The s ... more »Super high torque/super high speed programmable digital mini servo with metal gears with twin ballraced output shaft. Ideal for cyclic of 500-600 class helicopters. An aluminium case with for perfect cooling even under high loads.
Input voltage range 6.0-7.4 V (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Mini |
Servo type | Digital |
Programmable | Yes |
Torque at 6.0V [kg∙cm] | 6.8 |
Torque at 7.4V [kg∙cm] | 8.5 |
Torque at 8.2 V [kg∙cm] | 9.4 |
Speed at 6.0V [s/60st.] | 0.09 |
Speed at 7.4V [s/60st.] | 0.078 |
Speed at 8.2 V [s/60st.] | 0.07 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 6 - 8.4 |
Length [mm] | 35.5 |
Width [mm] | 15 |
Height [mm] | 28.55 |
Weight [g] | 38.55 |
Intended for | Aeroplanes,Helicopters |
Servo motor type | HV Coreless |
Instruction Manual | 17.1.2024 |