DS97 (0.058s/60°, 4.3kg.cm)
High torque/ultra high speed 17.7g digital micro servo w. metal gears; input voltage 4.8-6.0V, 2xBB. Ideal for cyclic of mini helicopters. Torque 3.8kg.cm, speed 0.070s/60° at 4.8V, torque 4.3kg.cm, speed 0.058s/60° at 6.0V. Aluminium mid case for perfect heat dissipation. Dimensions 23x12x27.25mm, weight 17.73g. Programmable with DSP-1 programmer.
High torque/ultra high speed programmable digital micro servo with metal gears and twin ballraced output shaft. Ideal for cyclic of 380-420 class mini helicopters. An aluminium mid case for perfect cooling even under high loads. Input voltage range 4.8-6.0 V (nominal). Using the DSP-1 USB Digital Servo Programmer/interface for GO servos and the MKS PC software you can program a wide range of servo parameters:Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μsLock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.Max. Duty: The duty cycle of the motor will be limited within this value. Pulse Lower: The minimum angular range will be limited within this command value.Neutral: ... több »High torque/ultra high speed programmable digital micro servo with metal gears and twin ballraced output shaft. Ideal for cyclic of 380-420 class mini helicopters. An aluminium mid case for perfect cooling even under high loads.
Input voltage range 4.8-6.0 V (nominal).
Using the DSP-1 USB Digital Servo Programmer/interface for GO servos and the MKS PC software you can program a wide range of servo parameters:
Dead Band: The signal value can be allowed to change under the circumstance without affecting the angle of the output / servo arm. MKS Default = 1μs or 1.2μs
Lock: The setting when the servo does not receive the signal - Keep at the last angular position / The motor is released.
Max. Duty: The duty cycle of the motor will be limited within this value.
Pulse Lower: The minimum angular range will be limited within this command value.
Neutral: The setting of the neutral position.
Pulse Upper: The maximum angular range will be limited within this command value.
Boost: The steps of the motor when starting-up. The larger the value is, the more powerful the step of the motor during the start-up.
Servo dimensions | Micro |
Servo type | Digital |
Programmable | Yes |
Torque at 4.8V [kg∙cm] | 3.8 |
Torque at 6.0V [kg∙cm] | 4.3 |
Speed at 4.8V [s/60st.] | 0.07 |
Speed at 6.0V [s/60st.] | 0.058 |
Control pulse width in neutral [µs] | 1520 |
Frame Rate [Hz] | 333 |
Deadband [ms] | 0.001 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | No |
Power supply [V] | 4.8 - 7 |
Length [mm] | 23 |
Width [mm] | 12 |
Height [mm] | 27.25 |
Weight [g] | 17.73 |
Intended for | Aeroplanes,Helicopters |
Servo motor type | Coreless |
Instruction Manual | 17.1.2024 |