103" Laser Z200 ARF - Orange 2,61m

Code
AJ0002O
Brand
AJ Aircraft
Availability
Price:
42 990 Kč
incl. VAT

ARTF semiscale kit of 3D aerobatic aeroplane (2,616 mm wingspan) for 100-130ccm petrol engine. Extremely light, Kevlar®/carbon composite reinforced balsa/plywood airframe, lots of carbon parts.

A semi scale model of the American aerobatic aeroplane for 100-130ccm petrol engine for experienced pilots capable of the classic pattern as well as extreme 3D style. The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine is to be fitted to a plywood/composite reinforced box using a radial mount. The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a pair of servos each. The empennage is a light all-balsa work; the two-piece horizontal tailplane uses a carbon tube joiner. The elevators are controlled by servos installed in horizontal stabilizer halves. The rudder is controlled by a pair of servos ... more »

A semi scale model of the American aerobatic aeroplane for 100-130ccm petrol engine for experienced pilots capable of the classic pattern as well as extreme 3D style.

The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine is to be fitted to a plywood/composite reinforced box using a radial mount.

The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a pair of servos each.

The empennage is a light all-balsa work; the two-piece horizontal tailplane uses a carbon tube joiner. The elevators are controlled by servos installed in horizontal stabilizer halves. The rudder is controlled by a pair of servos with a closed-loop linkage installed in the cockpit.

The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)

The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.

You will need a reliable 100-130 ccm petrol engine (GP-123 is always a great choice).

You will need at least 9-channel RC set to control your Laser Z200 - the precise set-up of paired servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.

You will need 8 fast and strong standard size digital servos, like Futaba S9177SV, Hitec HS-7950TH, D980TW or HSB-9381TH and one good standard size servo for the throttle control.

The ARTF kit contents: Oracover® covered fuselage, wing and tailplane, painted fibreglass cowl, carbon undercarriage, tail wheel assembly, wheels, set of accessories and instruction manual.

Wing span [mm]2616
Length [mm]2540
Weight [g]11800 - 12250
Controlled functionsS,S(2),V(2),K(4),M
Build difficultyS2,S3
Operating difficultyP4

Doporučený pohon a RC vybavení:

Motor GP123
Vrtule KAVAN (FOXY) 28x10“
Nádrž (ccm) 1000
Serva digi HV 8x HS-7950TH, 1x D645MW (M)
Serva Wide Voltage 8x S9177SV/D980TW, 1x S9670SV/D645MW (M)
Serva Brushless 8xHSB-9381TH, 1x D645MW (M)
RC souprava min. 9 kanálů

Ke správnému fungování webových stránek a k analýzám návštěvnosti používáme soubory cookies. Používáním webu souhlasíte s jejich užitím. BERU NA VĚDOMÍ