KAVAN Brushless Motor PRO 2225-1600

Code
KAV30.2031
Brand
KAVAN
Availability
Price:
990 Kč
incl. VAT

Small diameter outrunner brushless electric motor for model aeroplanes: glider 450g, trainer 450g, acro 400g, KV1600 RPM/V, input voltage 2-3S Lixx. 3.0mm shaft. An ideal power unit for 2M E-RES gliders with slim fuselage like MIRAI or MIRAI V.

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox. ... more »

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.

Motor Designation System: PRO xxYY-zzzz
PRO - brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolution per minute per Volt (RPM/V), “KV“

KAVAN PRO 2225-1600

KAVAN PRO 2225-1600 is a small diameter miniature motor for lightweight model aeroplanes up to 450 g all-up weight powered by 2-3S LiPo flight battery pack. The motor has been specially designed with slim fuselage 2M E-RES contest gliders like KAVAN MIRAI or MIRAI V in mind. It could also be used for “electrification” of rubber powered planes from of Guillow’s or Dumas kits (up to 1200 mm wingspan), it works great with indoor models, Dumas RC park-flyer kits and similar.

Motor installation: KAVAN 2225-1600 has been designed for the front mount installation only. Use at least two (opposite) or four M2.5 screws; these may not go deeper than 3-4 mm into the front case. The firewall should be made of 2.0 mm plywood.

The motor set contents: KAVAN PRO 2225-1600 motor w. cables (no connectors). The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual

Powering LiXX cells2 - 3
RPM/V [ot./min/V]1600
Max. power (180 s) [W]220
Internal resistance [mOhm]106
Open-circuit current (při 10 V) [mA]620
Max. peak current (180 s) [A]23
Diameter [mm]22
Length [mm]25
Length celková [mm]40
Shaft diameter [mm]3
Weight [g]34.5
Poles count14
Timing [°]15 - 25
ESC [A] 25 - 30
Weight of glider (up-to) [g]450
Weight of trainer (up-to) [g]450
Weight of acrobat (up-to) [g]400
Weight of 3D (up-to) [g]330
 
Doporučená vrtule 2S: 9x6""
3S: 8x6" (pro závodní větroně s krátkou dobou chodu motoru až 9x6")

Ke správnému fungování webových stránek a k analýzám návštěvnosti používáme soubory cookies. Používáním webu souhlasíte s jejich užitím. BERU NA VĚDOMÍ