KAVAN Brushless Motor PRO 3548-500
Outrunner brushless electric motor for model aeroplanes: glider 2800g, trainer 2700g, acro 2300g, 3D 1500g, KV500 RPM/V, input voltage 6S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2826-500.
KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox. ... több »KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
Motor Designation System: PRO xxYY-zzzz |
PRO - brushless outrunner electric motor |
xx - motor diameter in mm |
YY - motor length in mm |
zzzz - revolution per minute per Volt (RPM/V), “KV“ |
KAVAN PRO 3548-500
KAVAN PRO 3548-500 is a motor for model aeroplanes up to 2800 g all-up weight powered by 6S LiPo flight battery pack. It is great for 2800-3500 mm electric powered thermal gliders, scale and 3D aerobatic models - it is more suitable for slower models that work better with a larger propeller with lower rpm.
Motor installation: KAVAN 3548-500 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3548-500 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2826-500.
Powering LiXX cells | 6 |
RPM/V [ot./min/V] | 500 |
Max. power (180 s) [W] | 578 |
Internal resistance [mOhm] | 67.5 |
Open-circuit current (při 10 V) [A] | 1.25 |
Max. peak current (180 s) [A] | 26 |
Diameter [mm] | 35.2 |
Length [mm] | 47 |
Length celková [mm] | 69.5 |
Shaft diameter [mm] | 5 |
Weight [g] | 173 |
Poles count | 14 |
Timing [°] | 20 - 25 |
ESC [A] | 60 - 70 |
Weight of glider (up-to) [g] | 2800 |
Weight of trainer (up-to) [g] | 2700 |
Weight of acrobat (up-to) [g] | 2300 |
Weight of 3D (up-to) [g] | 1500 |
Doporučená vrtule | 6S: 12x6”-13x6.5" |