KAVAN Brushless Motor PRO 3536-850

Kód
KAV30.2020
Márka
KAVAN
Elérhetőség
Ár:
1 090 Kč
incl. VAT

Outrunner brushless electric motor for model aeroplanes: glider 1800g, trainer 1700g, acro 1300g, 3D 1050g, KV8500 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2814-850.

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox. ... több »

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.

Motor Designation System: PRO xxYY-zzzz
PRO - brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolution per minute per Volt (RPM/V), “KV“

KAVAN PRO 3536-850

KAVAN PRO 3536-850 is a motor for model aeroplanes up to 1800 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for 2000-2500 mm electric powered thermal gliders, MULTIPLEX® FunCub, Solius, Heron, 3D aerobatic models - it is more suitable for slower models that work better with a larger propeller with lower rpm.

Motor installation: KAVAN 3536-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0 mm plywood. The radial mount set is supplied with the motor.

The motor set contents: KAVAN PRO 3536-850 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual

Note: Alternative designation based on the stator dimensions: 2814-850.

Powering LiXX cells3 - 4
RPM/V [ot./min/V]850
Max. power (180 s) [W]650
Internal resistance [mOhm]43
Open-circuit current (při 10 V) [A]1.2
Max. peak current (180 s) [A]45
Diameter [mm]35.2
Length [mm]34
Length celková [mm]54.5
Shaft diameter [mm]5
Weight [g]108
Poles count14
Timing [°]20 - 25
ESC [A] 45 - 60
Weight of glider (up-to) [g]1800
Weight of trainer (up-to) [g]1700
Weight of acrobat (up-to) [g]1300
Weight of 3D (up-to) [g]1050
 
Doporučená vrtule 3S: 12x6"-13x6.5"
4S: 10x5.5"-11x5.5"

Ke správnému fungování webových stránek a k analýzám návštěvnosti používáme soubory cookies. Používáním webu souhlasíte s jejich užitím. BERU NA VĚDOMÍ